Intellinet

10-Port L2+ Fully Managed PoE++ Switch with 8 Gigabit Ethernet Ports and 2 SFP Uplinks

Name: 10-Port L2+ Fully Managed PoE++ Switch with 8 Gigabit Ethernet Ports and 2 SFP Uplinks
Brand: Intellinet
SKU: 562003
Price: 99.9 EUR
Availability: InStock

IEEE 802.3bt (4PPoE) Compliant (2 x 90 W Ports, 6 x 30 W Ports), 242 W PoE Power Budget, Layer 2+/Layer 3 Lite, Two 1G SFP Open Slots, Self-Healing Network, Desktop Format, Includes Optional 19" Rackmount Brackets

SKU: 562003

Highlights

Provides up to eight PoE network devices with power and data
Two 1G small form-factor pluggable (SFP) module slots
Self-Healing Network - the Powered Device Monitor feature (PDM), also known as PD Alive Check, restarts any connected PoE device that fails to respond or send out network traffic
Available in: 05/2024

[ view high resolution images ]

PoE++ IEEE 802.3bt Layer 2+ Managed Switch with Two Gigabit Uplinks and Self-Healing Network features

The 10-Port L2+ Fully Managed PoE++ Switch with 8 Gigabit Ports and 2 SFP Uplinks from Intellinet Network Solutions is the feature-rich installer’s choice for small businesses and enterprises. Two 10/100/1000BASE-T 4PPoE (PoE++) ports deliver up to 90 watts to even the most power-hungry devices like Thin Clients, POS systems or PTZ speed dome cameras. Six more PoE+ Gigabit ports activate devices like IP phones and IP cameras with power up to 30 W per port. Any IEEE802.3bt/at/af-compliant device attached to the switch requires no additional power, which avoids the time and expense of electrical rewiring and reduces the clutter from power supplies and adapters on ceilings and walls. This managed switch supports any mix of PoE and non-PoE devices, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.

Self-Healing Network with increased reliability and stability - Intellinet Powered Device Monitor (PDM)

This managed PoE switch is equipped with Powered Device Monitoring, a self-healing PoE function. A built-in PoE watchdog performs a PD alive check on all connected PDs and automatically resets unresponsive devices, such as PoE security surveillance cameras, by cutting off and then restoring power. The PDM function is especially useful in applications where connected devices are crucial to network operation, such as in industrial or surveillance settings. As an added benefit, the PD Alive function helps eliminate unnecessary technical support calls and costly trips by field-support engineers because the functional reboot can often bring the unresponsive device back online.

Web Management

Equipped with an impressive array of advanced management functions, this managed switch allows you to be in full control of your network. It supports VLAN, port aggregation, QoS, port mirroring, SNMP V1 and the popular V2c, just to name a few. It's also Domotz compatible for even easier management via the cloud.

PoE Management

This web-managed switch provides extensive PoE management features. The delay-time-per-port feature reduces the power hike that usually happens at system start, and the PoE priority feature (low, medium, high) allows you to define mission-critical, high-priority ports that will continue to receive power even if the switch's power budget has been exceeded. You can also define the maximum available power per port, turn PoE on and off at each port and monitor the current power draw of all connected PoE devices. Additionally, this managed network switch can send SNMP-traps messages to alert the administrator that the total power draw on the switch exceeds the user-defined threshold value.

Eliminate Bottlenecks with a total of Ten Gigabit Ports

Equipped with eight auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small, form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances. These are not shared combo ports, but true Gigabit ports, pushing the total available bandwidth up to 20 Gbps.

Provides up to eight PoE network devices with power and data
Two 1G small form-factor pluggable (SFP) module slots
Self-Healing Network - the Powered Device Monitor feature (PDM), also known as PD Alive Check, restarts any connected PoE device that fails to respond or send out network traffic
Domotz compatible for cloud management
PoE power budget of 242 watts
PoE++ output up to 90 watts on ports 7 and 8 ; PoE+ output up to 30 watts on ports 1 through 6
Supports 802.1Q VLAN (tag-based and port-based)
10/100/1000 auto-sensing ports that automatically detect optimal network speeds
Supports IEEE 802.3bt/at/af-compliant PoE devices (wireless access points, VoIP phones, IP cameras and more)
Supports IEEE 802.3bt/at/af detection and short circuit, overload and high-voltage protection
All RJ45 ports with Auto-MDIX and NWay auto-negotiation support
20 Gbps switch fabric / switching capacity
SNMP Management and Remote Monitoring (RMON)
IPv4/v6 dual protocol
Supports link aggregation (trunking)
IGMP Snooping for multicast filtering
Supports bandwidth control per port
Supports port mirroring
Supports two types of QoS: CoS and DSCP
Broadcast storm control with multicast packet rate settings
Supports jumbo frames up to 9216 Bytes
Store and forward switching architecture
Full/half duplex operation
Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode
Supports 8k MAC address entries with Auto-learning and Auto-aging
Buffer memory of 4.1 Mbits
Grounding point to protect equipment from external electrical surges
PoE surge protection (4 kV) for all RJ45 ports
ESD protection up to 8 kV for air and 4 kV for contact
Configuration via Web browser, Telnet, SSH or RJ45 console port
LEDs for power, link/activity, PoE and system
One high-efficiency fan for quiet, reliable cooling
Includes 19" rackmount brackets
Fully NDAA-compliant
Three-year warranty

IEEE 802.1p (Traffic Prioritization)
IEEE 802.1q (VLAN Tagging)
IEEE 802.3ad (Link Aggregation)
IEEE 802.3z Gigabit SX/LX
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
IEEE 802.3ad (Link Aggregation Control Protocol LACP)
IEEE 802.3af (Power over Ethernet 802.3at Type 1)
IEEE 802.3at (Power over Ethernet 802.3at Type 2)
IEEE 802.3bt (PoE++/4PPoE/Ultra Power over Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control, for full-duplex mode)

General
Ports
- Eight 10/100/1000 Mbps RJ45 PoE-enabled ports
- Two Gigabit SFP slots
- One console port
Media support:
- 10Base-T Cat5e UTP/STP RJ45, 8 pin
- 100Base-TX Cat5e UTP/STP RJ45, 8 pin
- 1000Base-T Cat5e UTP/STP RJ45, 8 pin
MAC address table: 8k
Buffer memory: 4.1 Mbits
Forwarding rate: 14.88 Mpps
MTBF: 392,650 hours
Backplane speed/switch fabric: 20 Gbps
Switch architecture: store and forward
Configuration options:
- Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation
- PoE on/off per port
- PoE maximum power per port
- PoE mode per port
- PoE priority per port: low, medium, high
- PoE alarm notification via SNMP traps
- PoE delay start configuration per port
- PoE restart time configuration per port
- PoE status monitoring
PD monitor function, watch guard
Flow control on/off per port
VLAN
Rate Limiting (ingress rate and egress rate)
Port Mirroring, one-to-one or many-to-one
Port Aggregation/LACP: 8 groups
Broadcast Storm configuration with broadcast rate, multicast rate and flooded unicast rate
IGMP Snooping
Access management filtering: SNMP, HTTP, HTTPS, SSH, TELNET
Quality of Service (QoS): CoS or DSCP
Link Layer Discovery Protocol (LLDP)
Integrated ICMP Ping client sends ping requests to other network nodes
SNMPv1/v2c/v3 (Simple Network Management Protocol)
RMON 1, 2, 3 and 9 groups (statistic, history, alarm and event)
TACACS+ via command line
Built-in RADIUS client to cooperate with the RADIUS servers
Tracert utility
Access Control List: MAC-based and IPv4/IPv6 IP-based ACL
Built-in Trivial File Transfer Protocol (TFTP) client
Dynamic ARP Inspection (DAI) discards ARP packets with invalid MAC-address to IP-address binding
DoS attack prevention
DHCP: Client/Option82/Snooping
LAN settings (IP address, Gateway, etc.)
SSHv2
Certifications: FCC, CE, RoHS, UKCA, NDAA

LEDs
PoE
Power
Link/Activity

Buttons
Mode
Reset

Pinout RJ45 output ports (PoE+ ports 1 - 6)
- Pin 1: DC (-)
- Pin 2: DC (-)
- Pin 3: DC (+)
- Pin 6: DC (+)

Pinout RJ45 output ports (PoE++ ports 7 - 8)
- Pin 1: DC (-)
- Pin 2: DC (-)
- Pin 3: DC (+)
- Pin 4: DC (+)
- Pin 5: DC (+)
- Pin 6: DC (+)
- Pin 7: DC (-)
- Pin 8: DC (-)

Power
Input: 100.0 - 240.0 VAC, 50 - 60 Hz, internal power supply
PoE power budget: 242.0 watts (max.)
Power consumption: 252.0 W (max.)

Physical
Metal housing
Dimensions (L x W x H): 230 x 280 x 44 mm (9.06 x 11.02 x 1.73 in.)
Net weight: 2.5 kg (5.51 lbs.)
Gross weight: 2.65 kg (5.84 lbs.)

Environmental
Operating temperature: 0 - 45°C (32 - 113°F)
Storage temperature: -40 - 70°C (-40 - 158°F)
Operating humidity: 10 - 90% RH, non-condensing
Storage humidity: 5 - 90% RH, non-condensing

Package Contents
10-Port L2+ Fully Managed PoE++ Switch with 8 Gigabit Ports and 2 SFP Uplinks
Power cable
Instructions
19" rackmount brackets